PRODUCTS

Rotary Dryer

Rotary dryer, also named as rotary drum dryer and rotary drying machine, is energy-saving and high efficient drying equipment.

Detailed introduction

Capacity:

1-50tones per hour

Fuel:

Coal, Gas, Oil, Biomass fuels, Wood,etc

Processed Materials:

Manure, Sand, Coal,Slag, compound fertilizer, straw briquette fuel, granular fuel and saw dust briquette.

Applications:

Industries of metallurgy, chemical engineering, construction materials and mining.

Product Introduction

Rotary dryer, also named as rotary drum dryer and rotary drying machine, is energy-saving and high efficient drying equipment. Rotary dryer is widely used for drying materials in industries like cement, mine, building materials, chemistry, food and fertilizer, etc, raw material such as: sand, coal, slag, slurry, wood chips, etc.

This rotary drying machine comes with thermocouples on the feeding and discharging device to control the temperature.

Working Principle

The raw material sand will be fed into the hopper through belt conveyor or bucket elevator. Sand rotary dryer is a slightly inclined rotating cylinder with horizontal lines.

Raw material sand will be fed from the higher end, while hot air enters from low-end, forming counter-current contact with the drying raw material sand.

As the rotation of the cylinder, raw materials run to the end of the sand dryer under gravity. Wet raw material, in the course of the cylinder moving forward, directly or indirectly get heat from hot air which temperature is more than 500°C, for drying wet material, and then discharged through the screw conveyor or belt conveyor installed at the end of discharging part.

Sand dryer is equipped with raising plate on the inside cylinder wall, and the raising plate plays the role of raising and falling down materials, increasing the contact surface between material and air flow, to improve the drying efficiency.

Features

  • Demand final moisture indicator can be easily controlled according to users' requirements.
  • The discharge temperature is below 50 degrees, and can be directly fed into the cooling shed without cooling or package.
  • Low energy consumption, low investment,and environmental protection.
  • Specially designed raising plate can maximize heat transfer between the material and hot air.

Technical Data

Model Gradient Rotation Speed Max Feed-in Gas Temperature Power Output Weight
(%) (r/min) (℃) (kw) (t/h) (t)
Ф600×6000 3-5 3-8 700 3 0.5-1.5 2.9
Ф800×8000 3-5 3-8 700 4 0.8-2.0 3.5
Ф800×10000 3-5 3-8 700 4 0.8-2.5 4.5
Ф1000×10000 3-5 3-8 700 5.5 1.0-3.5 5.6
Ф1200×10000 3-5 3-8 700 7.5 1.8-5 14.5
Ф1200×12000 3-5 3-8 700 11 2-6 14.8
Ф1500×12000 3-5 2-6 800 15 3.5-9 17.8
Ф1800×12000 3-5 2-6 800 18 5-12 25
Ф2200×12000 3-5 1.5-6 800 18.5 6-15 33
Ф2200×18000 3-5 1.5-6 800 22 10-18 53.8
Ф2200×20000 3-5 1.5-6 800 30 12-20 56
Ф2400×20000 3-5 1.5-5 800 37 18-30 60
Ф3000×20000 3-5 1.5-5 800 55 25-35 78
Ф3000×25000 3-5 1.5-5 800 75 32-40 104.9

Leave Message

If you have more information you would like to know, you can leave a message to us through the form below, and our staff will contact you as soon as possible

Contact

Service Line

+86-371-86688302

Fax

+86 371 86688303

Skype

+86 371 86688303

Phone/WhatsApp/Wechat

15736732866

add

No.97,West Street Dongqing,National Hi-Tech Development Zone,Zhengzhou,China

Cooperate with us!

Looking forward to working with you